What kills the schedule on a complex Prime Residential Project?

Complex roof structure as part of a new build development

It could be the pace at which the trades on site are working, but laziness is rarely the case, and disinterest is avoidable.

The following are likely to be just some of the factors causing problems, and they apply to everyone involved – from the client, to the designers, the contractor, all the way down to the young lads sweeping up on site.



1) A lack of patience. Projects which commence on site before all of the necessary details are agreed and the due diligence is completed will likely run into trouble.



2) Changes – Design, Scope or Brief changes once construction is underway. There’s nothing wrong with changes, just poor timing for change to occur.



3) A lack of organisation. Poor organisation will crash a project schedule. There’s no doubt about it.



4) Poor procurement. If lead times are not understood and materials or trades are not ordered or booked on time, the deadline will become a distant dream.



5) Poor communication. This one is critical – lines of communication must be open and clear at all times, between all of the stakeholders. Slow replies to missed calls or emails and that’s time ticking away.



6) An overly ambitious programme. Every effort should be taken to avoid a project’s schedule being fixed by a dictator. Programmes should be created using a system of meritocracy.



If you are a client hoping to embark on a successful residential project, I strongly suggest that you select a project team and contractor who understands the critical components applicable to you. There are plenty of builders who will get the job over the line, but there are fewer who will do it successfully.


Jeremy

Our post-construction phase framework.

  • Deep Cleaning – We employ professional cleaners who understand the importance of the products they are using and the methods they adopt.
  • Completion inspections – We go over every inch of the project to ensure that the work meets our incredibly high expectations.
  • Submission of Certification – We submit all certification to the building inspector/s to achieve project completion.
  • Handover – We carry out a full walk-through with our clients so that they can be shown the operations of all new equipment.
  • Operations & Maintenance Manual – We assemble and present a full O&M folder with guides for any new systems and care instructions.
  • Documentation Pack – Alongside the O&M manual, we assemble a documentation pack for any work completed which includes as-built drawings, service mark-ups, specification packs and relevant certifications.
  • Contacts Directory – Beyond being the main point of contact, we also form a comprehensive list of contacts which have worked on the project.
  • 12 Month Rectification Visit – As standard on any project, we always return after 12 months to carry out any snagging.
  • Ongoing support – We are there for our existing clients, long after completion. From handyman tasks to full maintenance plans, we offer a level of service which is not offered to the wider public.

Our construction phase framework.

  • Internal Inspections – There are a host of inspections to be completed and recorded on a daily and weekly basis. From welfare facilities, tidiness and security to major safety considerations such as scaffolding – our site agents use a centralised mobile application, where we have created bespoke templates to follow and track all of the inspections.
  • External Inspection – We organise and fulfil compliance inspections from building and warranty inspectors and our third-party health and safety inspector.
  • Meetings – We hold official weekly site meetings for the project team and all parties which are affected the current or imminent programme. We also hold official progress meetings, normally on a monthly frequency, with the clients and wider project team.
  • Reviews – We constantly review and tweak all of the various pre-construction project plans and main programme, issuing any changes to the project team and client.
  • Quality Control – Anyone working on our sites knows the exceptional standards we expect, but we still remain vigilant and ensure that the standards are met in every detail.
  • Information Collation – we collate and present all building control inspections, product warranties, operating and maintenance records and start to form the post-completion documentation.

Our pre-construction framework.

  • Define the Project Scope – We sit down and evaluate the drawings, technical specifications and information schedules before setting out clear project objectives, deliverables, a breakdown of key components and a list of possible conflicts.
  • Set a Project Programme – using the agreed scope, we layout a project programme. We do this using GANTT chart software which is a tool to visualise and rationalize time scales.
  • Form a Cost Management plan – we use the costing documents and project programme to estimate financial forecasts.
  • Form a Risk Management plan – we seek to find, highlight and plan for any items which may create risk to the programme or budget.
  • Form a Health and Safety plan – this is an extension of our Construction Phase Plans and highlights our use of developed Risk and Method Statements.
  • Create a communication plan – how we inform any external parties like neighbours of work that may affect them, we look at setting on/off site meeting frequencies, expectations for the transfer of information in RFI’s (requests for information), completion of various Registers and form a centralised shared information hub.
  • Form a Procurement Plan – We assess the lead times of all proposed materials and trades and map these against the project programme to highlight any risks to the programme. 
  • Highlight Quality Concerns – we review the selected materials and specifications to assess any areas which will need careful quality control to meet our high expectations.

Our compliance commitments:

  • Qualified and competent personnel for every role, including Site Manager.
  • Safety Training Scheme (SMSTS) qualified site agents.
  • Dedicated Construction Phase Plans.
  • Fully developed Risk Assessments and Method Statements (RAMS).
  • Thorough Fire Control and Emergency Plans.
  • Detailed site inductions for all personnel and visitors.
  • Correct and clear site signage and first aid stations.
  • Regular inspections and maintenance of all plant and equipment by qualified third party inspectors (LOLER).
  • Daily inspections of plant and equipment.
  • Regular site inspection audits by a third party health & safety consultant.